A Govee Corner Lamp is easily installed, and this means that you will enhance your room with a modern, immersive light. It is a simple, professional installation guide that will help you install your lamp with ease, have the best of light effects, a beautiful atmosphere, and a perfect fit in any room.
Part 1. How to Install Govee RGBICW Smart Floor Lamp Basic?
Steps of Installing Govee RGBICW Floor Lamp Basic
Step 1. Insert a connecting piece into the pole such that its end is visible through the holes.
Step 2. Press the bottom of the strip light against the metal pole after inserting the wire into the base.
Step 3. Fasten the top of the strip light to the pole.
Step 4. Adjust the center section and apply pressure to both sides from the center.
Part 2. How To Install Govee Floor Lamp 2?
Steps of Installing the Govee Floor Lamp 2
Step 1. Use the two included screws to attach the single connecting component to the light base.
Step 2. Put the lamp pole together. Differentiate the top component.
The top metal has a cap on its head.
Connect the three meta poles with the two metal connecting pieces after aligning them in the proper order.
To fasten each connecting component to the metal slots, use the screws in the appropriate holes.
Step 3. Place the lamp pole that is hooked into the lamp base.
To fasten the linked light pole and the connecting component on the lamp base, use the two included screws.
Step 4. Attach the silicon strip light's wires to the lamp base's port. The arrow marks need to point in the direction of one another.
Make sure the exposed wires are within the light base by pushing the connecting section inside.
First, insert the light's two ends into the channel.
To fit the light in, press the central section. From the center outward to the two ends, press the strip light.
Part 3. How to Install the Govee Lyra Floor Lamp?
Steps of Installing the Govee Lyra Floor Lamp
Step 1. Take the top piece with the closed head first.
Then use screws to join them after sliding one long attachment piece into it. 
Repeat with the bottom piece and the other long attachment portion.
Step 2. The shortest attachment portion should then be screwed into the two closely spaced holes at the bottom piece's end.
Step 3. After inserting the post's bottom into the lamp base, tighten the screw.
Step 4. To install the silicon strip light, connect its wires to the base's wires, ensuring their colors match.
Step 5. Press a few inches of the strip into the bottom of the light pole after folding the wires into it.
Step 6. Next, insert the strip light a few inches into the pole's top.
Step 7. Before completing the remaining pieces above and below, push in the center of the strip lights. Inserting the top and bottom first will guarantee a precise fit, even if it can seem excessively lengthy.
Remove the plastic tab and magnetically attach the remote to the remote mount. The mount is simple to remove, simply twisting it.
Final Look after assembly.
Conclusion
The corner and floor lamps offered by Govee are easy to install, convenient, and a fantastic solution to making any room immersive by adding lamps. These models will provide hassle-free assembly, intelligent control, and excellent atmosphere. In case you are willing to change your room into something stylish and convenient, review the Govee lamps covered in this guide and feel the difference yourself.
