Govee is joining forces with Corsair to elevate the modern gaming atmosphere by integrating Govee’s smart lighting into Corsair’s iCUE software ecosystem. Users will be able to control and synchronize the lighting effects of Corsair RGB peripherals and Govee lights.
Recommended Products
iCUE Compatible Products List
Your Gaming Aesthetic, Enhanced by Govee
User Guide
Show More
Users will need to install iCUE v5.14 or newer from Corsair.com
• Once users have installed iCUE, users should click on the icon on the upper right to open Settings
• Expand the Software Settings header and click on Integrations
• Toggle on the Govee Integration and click on Setup Wizard
• Once users have installed iCUE, users should click on the icon on the upper right to open Settings
• Expand the Software Settings header and click on Integrations
• Toggle on the Govee Integration and click on Setup Wizard
• In order to allow for iCUE to detect the Govee products properly, the following conditions must be fulfilled prior to setup:
i. Govee devices must be connected and on
ii. Govee devices must be detected and configurable in the Govee mobile application
iii. LAN Control must be enabled for each of the products since we will be using LAN control to detect and configure the devices in iCUE
i. Govee devices must be connected and on
ii. Govee devices must be detected and configurable in the Govee mobile application
iii. LAN Control must be enabled for each of the products since we will be using LAN control to detect and configure the devices in iCUE
• If all the conditions are fulfilled, iCUE should detect the devices in a few brief moments
• Users will need to select one device at a time for iCUE configuration – device names reported will be based on the product name by default
• Users will need to select one device at a time for iCUE configuration – device names reported will be based on the product name by default
• After uses select the device they want to use in iCUE, the pairing process will begin so iCUE can communicate with and add the device
• Upon successful pairing, users can either choose to add additional devices or finish the process
• Upon successful pairing, users can either choose to add additional devices or finish the process
If there are circumstances which causes iCUE to not detect the
device on the network, there is an option to pair by manually
add the IP address associated with the device
Govee products will show up in iCUE as individual devices similar to all other CORSAIR products
• Wth iCUE, users will be able to customize the color of the available segments from each device. All iCUE color patterns are available to the user in the same configuration as a typical CORSAIR RGB product
• We also added an ON/OFF toggle as this is an ambient lighting device
• We also added an ON/OFF toggle as this is an ambient lighting device
Finally in device settings, we enable the capability to rename the device as well as control the brightness – both important features for ambient lighting