LED strip lights are preferred for accent lighting, ambient lighting, decorative lighting, and a wide range of purposes. Whether it’s their appearance, vibrant colors, and efficiency, they tick all the boxes.But while installing them, people often think about cutting the strip for perfect fitting. Let’s understand when you can cut LED strip lights and which of them are cuttable. We will also go through the step-by-step process of cutting LED strip lights so that you can do it on your own. Part 1: Can you cut LED strip lights? Yes, you can cut LED strip lights. However, it depends on the LED strip light you have. Most of the LED strip lights can be cut. But some LED strip lights won’t work if you cut them. Their circuit will break, and they will become useless. Before cutting LED strip lights, make sure the technology and type of light you are using is cuttable. You can refer to the manufacturer’s guidelines. Even if you are cutting LED strip lights, you need to cut them from suitable locations. And follow proper steps to prevent any damage. Part 2: Where To Cut LED Strip Look for small copper pads marked with a scissors icon ✂️ or a dotted line. These are spaced regularly (e.g., every 3–10 LEDs, depending on the strip). In most LED strip lights, you will see connector joints at various locations. These are usually 3 or 4 connector joints. You can cut LED strip lights at these joints without any issues. Moreover, most manufacturers allow you to cut LED strip lights from the far end side. You can cut a few sections. However, they do not allow you to cut from the start and up to a certain length. Before cutting the LED strip lights, check the manufacturer’s guidelines. Part 3: How to Cut LED Strip Lights? 3.1 Tools for cutting LED strips You only need scissors to cut LED strip lights. There is no need for pliers, cutters, or any other tool. Just make sure the scissors are sharp enough to cut strip lights without any hassle. 3.2 How do you cut led strip lights Step 1: Measure your required length. Step 2: Look for a cut point marked with a ✂️ scissors icon or dotted line. Both can be cut here. Step 3: Unplug the strip from power before cutting. Step 4: Cut across the marked line, avoiding damage to chips or LEDs. Check for residue at the cut ends to prevent short circuits Check out the official Govee video guide: Learn more about how to install LED strip lights. Part 4. Can I Cut Govee LED Strip Lights? Check Out All Cuttable LED Strip Lighting Note:It’s not recommended to use or reconnect the cut section of the LED strip. Once you cut the Govee strip light, the cut-off piece cannot be used again. However, some Govee strip lights allow you to connect two new strips without cutting. Govee LED Strips That Support Cutting: Govee Light Model Cuttable Spliceable Bendable H61F2/5/6 Yes Yes Yes H61E5/6 Yes Yes H61B3/5/6 Yes Yes H61E0/1 Yes Yes Yes Govee Strip Light 2 Pro(H61F2/5/6): Bendable, Cuttable, and Connectable Strip Light 2 Pro is equipped with 5-in-1 RGBIC+ technology. There are independent IC chips to create multiple colors in one LED and offer exquisite color bending. Users can easily choose colors and apply presets. The LED strip can be bent and cut. If you want to extend the strip, it is also possible. Govee COB Strip Light Pro(H61E5/6): Bendable and Cuttable These strip lights have Next-Gen COB technology, which means 1260 LED per meter to offer smooth lighting effects and higher lumens. It offers a variety of preset modes and a massive range of colors. Users can easily bend the strip light and customize the length as per their needs. Govee RGBIC LED Strip Lights with Covers(H61B3/5/6): Cuttable and Connectable These light strips with covers are for softer lighting effects. They are cuttable and connectable, which means you can increase or decrease the length of the strip as needed. It has 50 customizable segments and 17 animation effects. They are ideal for setting along corners. FAQs about Cutting LED Strip Lights 🔵Are LED light strips Trimmable? Yes, LED strip lights are trimmable. However, it depends on the light strip you have. You have to cut according to the manufacturer's guidelines. Keep in mind that some LED strip lights cannot be trimmed. 🔵Can you cut Govee RGBIC lights? Not all Govee RGBIC lights support cutting. These strips are controlled by individual ICs. If you cut them, they might stop working or the performance is affected. Only the H61FX series, H61E5/6, H61B3/5/6, and H61E0/1 LED strip lights can be cut. 🔵How to know if LED strips are cuttable? You can check the manufacturer’s guidelines or look for the designated cut points. These points are usually marked by a line or a scissors icon along the strip. 🔵Can you cut led strip lights anywhere? No, you can’t cut LED strip lights from any location. If you do so, you might end up breaking the circuit. In case you cut at the wrong place, the strip or a part of it will not function properly. Conclusion It's possible to cut LED strip lights. Most LED strip lights are cuttable, but some are not. You must check the manufacturer's guidelines before cutting the LED strip. Even if the LED is cuttable, you need to follow proper steps to cut the strip without affecting its performance. Check out the cuttable Govee lights we have shared. You cut them and adjust them according to your requirements without any worries.